Directed Electronics 5 Automobile Alarm User Manual


 
20
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
z
Panic mode enabled/disabled: Some states have laws
against siren capability.
z
Full trigger response 30, 60, or 90 seconds: This determines
how long the full triggered sequence lasts. Some states have
laws regulating how long a security system can sound before
it is considered a nuisance.
z
False Alarm Control Technology (FACT II) on or off: Please
refer to the FACT II section of this guide for a complete
explanation of how FACT
II operates. If FACT II is pro-
grammed off, the security system will respond to inputs from
any sensor indefinitely.
z
Siren tones and chirp volume: The output of the siren con-
sists of six different tones in sequence. Any of these tones
can be eliminated by your dealer, resulting in a unique, eas-
ily identifiable siren sound. The siren chirps can be either full
volume or 6 decibels quieter than the full alarm blast.
manual programming instructions
Be sure to document changes by taking note of all feature changes
made in programming mode.
To enter the User Selectable Features programming:
1. Ignition on - Turn the ignition to the run position or start the
engine.
nnoottee::
Because many states have laws regulating security systems, pro-
gramming FACT II off may cause your system to violate state laws.