Filter
Top Products
25
© 2001 directed electronics, inc.
remain active until the system is disarmed. If the door is opened
or the ignition is turned off and on in an attempt to restart the
car, the siren and light flashing will begin again.
disarming the VRS
Familiarize yourself with the VRS triggering sequence and
the disarm procedure. It is important to recognize the VRS
trigger sequence and know how to disarm it in case of
accidental activation.
Once the VRS is armed, it does not disarm automatically. You
must disarm it the next time you operate the vehicle. You must
disarm it with one of the following procedures:
If the system has not entered the triggered sequence (siren has
not started chirping):
1. Turn the ignition on.
2. Press the disarm button on the
transmitter for one second. The
lights will flash and the siren will
chirp twice.
If the system has entered the triggered sequence (siren has begun
chirping), pressing the disarm button of the transmitter will not
disarm VRS. To disarm the VRS during a VRS trigger sequence: