Filter
Top Products
17
© 2001 directed electronics, inc.
oowwnneerr rreeccooggnniittiioonn
Owner Recognition is a feature available exclusively from
Directed
®
. Using a Directed
®
Bitwriter hand-held programming
tool, your dealer can program many of the system settings. The
programmer makes it possible to program different settings for
each transmitter that is used with the system. Then, whenever a
specific transmitter is used, the system will recall the settings
assigned to that transmitter. Owner Recognition lets up to four
users of the system have different settings that meet their specific
needs. It is almost like having four separate alarms in your
vehicle, one for each user.
ssmmaarrtt ppoowweerr uupp IIII
This security system will store its current state to non-volatile
memory. If power is lost and then reconnected the system will
recall the stored state from memory. This means if the unit is in
Valet Mode and the battery is disconnected for any reason, such
as servicing the car, when the battery is reconnected the unit will
still be in Valet Mode. This applies to all states of the system
including arm, disarm, VRS, and Valet Mode.
note: Owner Recognition cannot be programmed
without a Bitwriter and the necessary software. Check
with your dealer for more information.