Filter
Top Products
20
© 2008 Directed Electronics. All rights reserved.
➤ Locking the vehicle
To lock the vehicle, press the button on the remote control.
The horn in the vehicle “honks” one-time, and the parking lights flash one-time. If
the power door locks have been connected, the doors lock.
The system automatically checks for errors when it locks. The 2-way remote
honks one-time and then flashes the LED indicator to confirm locking. If no
lock confirmation is received, the remote emits the out-of-range signal.
If errors are found when locking:
If the door is open when you lock the vehicle, the horn honks once and the park-
ing lights flash. The horn then honks a second time to indicate that the door is
open and the LED on the control center flashes in groups of three
The 2-way remote control sounds a short “error” tone, and the LED indicators
next to the and buttons flash. Note: The optional horn honk and door input
has to be installed for this function.
Locking without the honk (Silent Lock)
Press the button on the remote one-time, and then press the button. The
vehicle locks without the confirmation honk. The parking lights flash one-time.
The 2-way remote flashes the LED to confirm locking. If no lock confirmation
is received, the 2-way remote emits the out-of-range signal.
➤ Unlocking the vehicle
Lock the vehicle normally. Press the button one time. The vehicle horn honks
two-times and the parking lights flash. The 2-way remote beeps two-times and
the LED indicator flashes. The door locks, if connected, unlock. If no unlock
confirmation is received, the 2-way remote emits the out-of-range signal.
UnLocking without the honk (Silent Unlock)
Lock the vehicle normally. Press the button on the remote one-time, and then
press the
1
3
4
5
6
2
A U
X
button. The vehicle unlocks without the confirmation honk. The
parking lights flash two-times. The 2-way remote flashes the
1
3
4
5
6
2
A U
X
LED to confirm
unlocking. If no unlock confirmation is received, the 2-way remote emits the