Filter
Top Products
43
© 2008 Directed Electronics. All rights reserved.
Disarm 3 disarmed with Low battery indicator
Disarm 4 System disarmed with Tamper Alert
Disarm 5 System disarmed with NPC active.
➢ Table of zones
A zone is represented by the number of LED flashes used by the system
to identify a particular type of input. Standard input assignments are
listed in the following table, along with spaces to write in any optional
sensors or switches that have been installed.
Zone Description Dealer installed options
1 Trunk Pin
2 Instant trigger: a heavier impact
detected by the onboard shock
sensor
3 Door switch trigger
4 Instant trigger: For optional
sensors
5 Ignition trigger
6 Hood Pin
➢ Interpreting zone diagnostics
Warn Away responses are not reported by arming or disarming diag-
nostics. If you receive a Bypass notification when arming or a Tamper
Alert notification when disarming, look at the LED on the control cen-
ter.
Active or triggered zones will be indicated by a pattern of blinks by
the LED.