Filter
Top Products
13
© 2008 Directed Electronics. All rights reserved.
➢ Battery Replacement
Slide the door up to expose the battery beneath the holder. Remove the
expired battery. Place the new battery into the remote control. When
power is returned the remote control is ready for use.
➢ Multi-car control capability
You can operate the 2-way remote control system for two cars, with full
command capability for both vehicles.
To change the Car to be operated:
Two Way Remote
Press/hold the 1.
AUX
button for 3 seconds or until the remote beeps.
The
ALL
or
ALL
icon ashes and the text “Car 1” or “Car 2” is
displayed.
Change car: While in this mode press the 2.
AUX
button to switch
between cars and the
ALL
or
ALL
icon changes accordingly
indicating which car the remote currently operates.
Select the car you want to operate and then press any command 3.
to operate the system. The selected car remains selected until the
setting is changed.
One Way Remote
Press and hold the 1.
AUX
button until the amber light blinks once or
twice indicating current vehicle (one blink = car 1, two blinks =
car 2).
To change from one car to the other press the 2.
AUX
button again.
When using the remote to control the system, the amber light will 3.
flash in a sequence of 1 or 2 flashes indicating the current vehicle
selected.