Filter
Top Products
13
© 2011 Directed Electronics. All rights reserved.
➢ Valet mode
You can prevent your system from automatically activating the Failsafe® Starter
Kill. When the system is in Valet mode, the feature is disabled. The doors
do not automatically lock. This is useful when washing or having the vehicle
serviced.
To enter or exit valet mode with the Control button:
1. Turn the ignition key on and then off.
2. At anytime during the next 10 seconds, press and
release the Control button on the Control Center.
The LED turns on solid when you enter Valet®
Mode, and turns off when exit Valet Mode.
To enter or exit Valet mode with the remote control:
Press
A U
X
two times, and then
A U X
to set the system in Valet Mode. Repeat the
process to take the system out of Valet Mode.
The Control Center LED turns on solid when in Valet Mode and turns off when
exiting Valet Mode. The optional horn honk does not activate when locking
and unlocking in Valet Mode.
➢ Panic Mode
If you are threatened in or near your vehicle, you can attract attention by trig-
gering the system with your remote. This feature is only available if the optional
horn honk is connected.
• Press
A U X
for 2 seconds, to enter Panic Mode. The horn honks and the
parking lights flash for 30 seconds.
• To stop Panic Mode at any time: