Filter
Top Products
MAN# 650280:D
MODEL MCL-2002
TANK MOUNT SPEEDOMETER/TACHOMETER
*To avoid damage to motorcycle, please see Speedometer, Tachometer, and Status and Warning Indicators sections for details on locating
VSS, Tachometer, and indicator wires for most motorcycle applications
**For 2004+ HD utilizing the “Fat Bob” tank mount, please see our MCL-2004, it is designed as a direct plug-in gauge for these models. The
Check Engine indicator will not function using this gauge on 2004+ HD models due to the signal being fed through the ‘data bus’.
Mounting:
The base system is universal enough to fit in either a new-style, clip-in
(1995 or newer) or into the older style, bolt-in. The rubber mounts with studs on
both sides are used for the bolt-in style. The L-brackets are used for the clip in
style. The ¼” ABS ring is used for Deuce mounting.
Mounting hardware for the bolt-in system
with a speedometer cable
Mounting hardware for the clip-in system with an electric
transmission speed sensor.
IMPORTANT NOTE!
This gauge has an odometer preset option that is only available for the first
100 miles (160km) of operation. See “preset odometer” for instructions.