Filter
Top Products
JUMPER PIN DIAGRAM
The jumper plugs inside the control module determine the unit's (+12V) or (-) Negative Parking & Dome Light
Relay outputs (White & Black/White wires). Use the jumper pins to change the Positive or Negative Polarity of
the outputs as required for your particular installation. (Default = Positive for Parking Light and Negative for
Dome Light) See diagram below.
JUMPER
PLUG
SIDE VIEW
JUMPER
PINS
(-) NEG. DOME LIGHT
CS-865RKE MODULE
+12V PARKING LIGHT
(DEFAULT)
TOP VIEW OF JUMPER PINS
(-) NEG. PARKING LIGHT
+12V DOME LIGHT
(DEFAULT)
Parking Light
JUMPER