Filter
Top Products
Page 6
VALET MODE:
The valet button allows you to temporarily bypass all alarm functions,
eliminating the need to hand your transmitter to parking attendants or garage
mechanics. When the system is in valet mode, all alarm functions are
bypassed, however the remote panic feature, remote door locks and remote
start will remain operational.
1. Enter the vehicle, and turn the ignition key to the ON position.
2. Press and hold the valet button until the LED turns on solid. The system
will remain in the valet mode.
3. To return to normal operation, press and release the valet button
any time the ignition is on.
NOTE: Always remember to return the vehicle to the valet OFF position. This
will ensure that the vehicle remains protected at all times.
MANUALLY OVERRIDING YOUR SYSTEM:
USING THE VALET BUTTON FOR MANUAL OVERRIDE
Your security system can be disarmed without the use of the transmitter. This
is necessary, since you will need the ability to operate your vehicle if the
transmitter is lost or its battery fails. To bypass the alarm system;
1. Open the vehicle door. The alarm will sound.
2. Turn the ignition key to the ON position.
3. Within 5 seconds, press and release the valet button.
The alarm system will stop sounding and enter the (bypassed) mode. You
can now start and operate the vehicle normally.
Typically this override mode is used only if the transmitter has become
inoperative.
Programming Your Custom Override Code:
Unlike override switches easily found, and defeated, this security system
allows you to program a personal override code, offering a higher level of
security. To take advantage of this option consult your installation center for
programming details. The system comes from the factory with a pre-
programmed override code of 11. To change this default override code, do the
following: