Filter
Top Products
REMOTE STARTING THE VEHICLE:
Press and release the option button of your transmitter 2 times within 2 seconds
to activate the remote start system. The vehicle will start and remain running
for the pre-programmed 10 or 15 minutes. As a visual indication, the parking
lights will flash or turn on depending on the programming set up by your installa-
tion center.
When you arrive at your vehicle, unlock the vehicle by pressing and releasing the
unlock button of your transmitter. Enter the vehicle and turn the ignition key to the
ON position.
The system WILL NOT start the vehicle if any one of the following conditions exist:
1. The vehicle's hood Is opened.
2. The gear shift selector is in any gear other than park.
3. The brake is depressed.
SHUTTING DOWN THE REMOTE START:
To shut down the remote start feature form the transmitter press and release
the transmitter button 2 times within 2 seconds.
REMOTE START VALET MODE:
Valet Mode is used to disable the system from remote starting. To enter or exit
valet mode simply follow the 4 steps outlined below:
1. Push and hold the programming/valet button.
2. Cycle the ignition ON/OFF, ON/OFF, ON/OFF.
3. Release the programming/valet button.
4. The LED will flash 2 short flashes and 1 long flash when in remote start
valet mode
CAUTION! Be certain that the vehicle is outdoors before using this or any remote
vehicle starting device. A running engine produces dangerous carbon monoxide
fumes which can be harmful or fatal if prolonged exposure occurs. DO NOT
remote start the vehicle if the car is garaged.