Filter
Top Products
9
Using the Songbird Option
The Code Alarm CA-140
TM
is equipped with a feature called
“Songbird”. Songbird allows you to program different songs or tones
similar to “ring tones” on a cellular phone. A song or tone can be
programmed to almost any system function that has a vehicle horn or
siren response (ie: arm/disarm chirps, lite touch impact sensor,
panic mode).
Functions that can’t be programmed with a Songbird tone:
1. Impact sensor override
2. Alarm trip ID
Turning Songbird On:
Using either the 2-way tranceiver ot the 1-way transmitter remote
control, press both LOCK and UNLOCK buttons simultaneously.
The siren will emit a confirmation tone indicating that songbird is on.
Selecting a Function and Songbird Tone/Song
1. Activate a function that you would like to set to a specific tone
(ie: lite touch impact sensor is activated by striking the
vehicle with an impact that would trigger a lite touch
response.
2. Within 10 seconds of activating the function:
A). Press AUX, then press FIND/PANIC within 2 seconds.
The siren will emit a confirmation tone indicating that you
have entered the program mode.
3. Use the LOCK and UNLOCK buttons to advance up or down
through the different tones. Pressing the AUX button will
play different versions and lengths of the tone you have
selected.
4. When you have decided on a specific tone, press the FIND/
PANIC button to lock that tone to the function, and exit
programming.
The siren will emit a confirmation tone indicating that you have exited
programming mode.
Turning Songbird OFF:
Press both UNLOCK and FIND/PANIC buttons simultaneously.
The siren will emit a confirmation tone indicating that songbird has
been turned off.