Filter
Top Products
13
Emergency Disarm Procedure
If your remote control is lost or fails to function, use this procedure to
disarm the Code Alarm CA-140
TM
and start your vehicle.
1.Use the keys to enter the vehicle.
The alarm will sound once the door is opened.
2.Insert the key into the ignition and turn to the ON position.
3.Locate and press the emergency override button.
The alarm will turn off and then you will be able to
start your vehicle.
If the E-code coded override feature is enabled on your system, use
this procedure to disarm the Code Alarm CA-140 and start your
vehicle.
1. Use the keys to enter the vehicle.
The alarm will sound once the door is opened.
2. Insert the key into the ignition and turn to the ON position
3. Press and release the emergency override button the
number of times that corresponds to the first digit of the
code and turn the ignition key off.
4. Turn the ignition key to the ON position.
5. Press and release the emergency override button the
number of times that corresponds to the second digit of
the code and turn the ignition key off.
6. Follow steps 4 and 5 for the remaining two digits of the
code. After the correct 4 digit code has been entered, the
system will disarm.
Contact your installing dealer to change or activate you personal E-
code.
Your Emergency Disarm Button is located: