Filter
Top Products
7
Personal Protection Alarm (Panic)
Press and hold the FIND/PANIC button to activate the vehicle siren
and parking lights for 30 seconds. The vehicle’s horn is or siren will
“pulse” for 30 seconds. Press any remote control button to turn off the
Panic alarm.
Using Valet Mode
If the Passive Arming feature is enabled on your system, Valet mode
temporarily prevents the alarm system from arming automatically.
This is useful when fueling or servicing your vehicle.
To enter Valet Mode:
With the vehicle ignition on, press the ARM button. The blue
dashboard warning light (status indicator) will turn on for one second,
then turn off. This indicates that the system is in Valet mode. Once the
ignition is turned off, the status indicator will emit a quick double-flash
pattern.
Note: In Valet mode, all keyless entry, convenience and remote start
features operate normally.
To exit Valet Mode:
With the vehicle ignition on, press the DISARM button. The red
dashboard warning light (status indicator) will turn on for one second,
then turn off. This indicates that the system has exited Valet mode.
Hint: To prevent your security system from automatically arming while
unloading or refueling your vehicle, without placing the system
inValet mode, simply press the disarm button on your remote control
transmitter after turning the ignition key off. Doing so places your
system into a temporary or one time Valet mode. Next time you exit
your vehicle the system will arm in the normal manner.
Using the Turbo Timer Option
The CA-140
TM
turbo timer option allows the vehicle to remain running
for five minutes after the ignition key has been turned off. The turbo
timer option must be enabled before the feature will operate, see your
installing dealer for information.
To activate turbo timer:
1. After parking the vehicle, place your foot on the brake pedal.
2. Place the shifter in the PARK position on automatic
transmisson vehicles, or neutral and engage the parking brake
for manual transmission vehicles.
3. Continue to hold the brake pedal for 5-seconds.
4. Remove your foot from the brake pedal.
5. Turn the ignition key off, and remove from the ignition switch.
6. The vehicle will remain running for 5 minutes or unless the
brake pedal is pressed.
Using Your Remote Transmitter (cont.)