Filter
Top Products
20
English
Getting Started
Your Detector
Muting Alerts
•
Manual Mute
Press MUTE/button momentarily to turn off Audio Alert during an Alert
condition. Press MUTE/
button again during alert to turn on Audio Alert.
After current alert is gone, detector will un-mute and next alert sounds.
Auto Dark
•
When Auto Dark screen is engaged, a small dot displays
at bottom of screen to show that power is on. Touch any
button to recall Standby screen.
Highway/City Mode
•
IntelliShield
®
Tri-level City mode has a Highway mode and three City mode
levels: City X, City X Beep Off and City X+K.
IntelliShield
®
Tri-Level City Mode
Toggle from Highway to City mode for three levels of
Audio Alert suppression. Pressing City button will toggle
between Highway and the default City mode which is
City X. Default City mode can be changed within the
Menu. Factory setting is City X.
City X sounds a single beep when X band signal is first
detected but then subsequent audio alert is muted. The
alert sounds again when signal strength reaches level 3.
City X+K combines City X mode with delay of K band
audio alerts until signal strength reaches level 2.
City X Beep Off blocks all X band audio alerts until signal
strength reaches level 3.
XRS_R7_R9G_Final_012507.qxd:Layout 1 1/25/07 4:31 PM Page 20