Filter
Top Products
Nothing Comes Close to a Cobra
®
13
1. Position GPSL before actual
mount.
• Hold GPSL unit in place
with USB cable
connected to MDU.
• Using non-permanent
pen, mark two opposite
corners.
2. Peel off film from two-piece
fastener strips. Align with
two corner markings made
in step 1. Press GPSL
bracket against windshield.
• Fastener strips cannot
easily be removed.
Strength of adhesive
strips increases with
time.
• Do not pull on GPSL for
first 20 minutes.
THIS
SURFA
CE
TOWARDS
SKY
3. Connect cable between
MDU and GPSL.
IMPORTANT: Proper side of
GPSL module (“This Surface
Toward Sky” wording
embossed in unit case) must
be against windshield and
face sky.
Global Positioning System Locator (GPSL)
(XRS Model R9G Only)
•
Installation
Your Detector
XRS_R7_R9G_Final_012507.qxd:Layout 1 1/25/07 4:30 PM Page 13