Filter
Top Products
Installation
Your Detector
Nothing Comes Close to a Cobra
®
7
1. Position MDU before actual
mount.
• Do not attempt to adjust
MDU bracket.
• Hold unit in place.
• Using non-permanent
pen, mark two opposite
corners.
2. Peel off film from two-piece
fastener strips. Align with
two corner markings made
in step 1. Press MDU
bracket against windshield.
• Fastener strips cannot
easily be removed.
Strength of adhesive
strips increases with
time.
• Do not pull on MDU for
first 20 minutes.
Main Detector Unit (MDU)
XRS_R7_R9G_Final_012507.qxd:Layout 1 1/25/07 4:30 PM Page 7