Clifford 60 Automobile Alarm User Manual


 
Standard Features of the Concept 6O
(cont.)
Remote Window/Sunroof Closure Capability — On certain vehicles, the
system’s integrated timer and an optional relay can be used to automatically close
the power windows and sunroof every time you remotely arm your system.
Remote Headlight Activation Capability— Remotely turn on the headlights to
illuminate your way to and from your vehicle (requires an optional relay).
Smart Remote Trunk Release Capability — An electronic interlock assures the
optional remote trunk release can be activated only when disarmed. The interlock
also makes sure that the trunk release cannot be remotely activated while driving.
User-Selectable Headlight Reminder— Warns you if you forget to turn off the
headlights after you park your vehicle.
Advanced CMOS Microcomputer —Monitors system functions more than
1,000,000 times per second, yet it draws less power than the vehicle’s clock.
Extended Range Capability— The optional ElectroLoop Antenna™ mounts
unobtrusively inside your vehicle to triple the system’s remote control range!
Patented Remote Control Code Learning — Just a few flicks of a switch lets
you match the system with up to 4 different 12-channel Clifford remote controls.
Just as easily, a lost or stolen remote can be deleted from the system memory.
Multiple-Car Control Use the same remote to control up to 7 different vehicles.
High-Luminescence LED Status Indicator with Automatic Battery-Saving
Mode
— Adds visual deterrence and identifies system status. To conserve
vehicle battery power, if the system has remained continuously armed for 48
hours, the flash rate will automatically slow to half the normal rate. If left
continuously armed for 96 hours, the blink rate will slow to one-quarter the
normal rate.
Control Unit with 5 Channels— For remote system operation and accessories.
Multiple Sensor/Trigger Inputs
— Separate inputs for three sensors and for the
doors, trunk and hood for precise trigger/sensor identification.
Patented SmartPowerUp™ II — When power to the system is disconnected, the
system’s non-volatile memory always remembers the last state (armed, disarmed
or valet mode) and returns to that state when power is restored. So if a thief
disconnects the power and then restores it in an attempt to start the car, the
system will re-arm and instantly sound the siren while immobilizing the vehicle.
Full-Time Programming Access— You can easily change the status of nearly 30
user-selectable features at any time, even while driving. Clear, audible signals
confirm each feature selection and setting.
7