Filter
Top Products
TO ARM
THE SYSTEM . . . . . . .
Press button 1 (channel 1) once. You will hear
two chirps
and the
parking lights will flash twice. The dashboard LED will flash
repeatedly and the car doors will automatically lock.
TO DISARM
THE SYSTEM . . . . . . .
Press button 1 (channel 1) again.
One chirp
and one parking light
flash confirms disarming. In addition, the doors will automatically
unlock and the interior lights will turn on and stay on for 30
seconds or until you start the engine, whichever occurs first.
TO SILENTLY
ARM OR DISARM
THE SYSTEM . . . . . . .
Press button 3 (channel 3). Your Concept 60 system will arm or
disarm with all the indications noted above except for the chirp
acknowledgments.
TO ACTIVATE
THE PANIC
FEATURE . . . . . . . . . .
Press button 1 (channel 1) for 3 seconds. The parking lights will
flash repeatedly and the siren will blare for 30 or 60 seconds
(user-selectable), or until you press button 1 again to turn it off. If
the ignition is on (indicating you are in the car), the doors will
automatically lock to prevent an assailant from entering. If the
ignition is off, the doors will unlock, allowing you to enter
immediately without fumbling with your keys.
TO REMOTELY
TURN ON THE
HEADLIGHTS. . . . . . .
Button 2 (channel 2) controls an electronic interlock that lets you
separately command two functions with the same channel: one
when the system is armed and another when disarmed. Pressing
button 2 while the alarm is armed will optionally turn on the
headlights for any duration you wish between one second and
two minutes (the factory setting is 30 seconds; see
User-selectable features
on pages 21-25).
TO REMOTELY
OPEN THE TRUNK . . .
Button 2 (channel 2) can control another function when the
system is disarmed, such as an optional remote trunk release.
Pressing button 2 while the alarm is disarmed will remotely open
the trunk.
TO ACTIVATE
OTHER OPTIONS
REGARDLESS OF
ALARM STATE. . . . . . .
Button 4 (channel 4) and channels 5–8 (see How to use your
keychain remote control on page 11) can activate accessories
such as the IntelliStart remote engine starter, remote power
window control, electric garage door and entry gate opener(s),
Concept systems on your other vehicles, etc.
What about
channels 9 – 12?. . . .
Channels 9 through 12 control remote valet mode entry/exit (see
page 16), remote override of optional sensor #3 (see page 17),
and remote adjustment of each of the two Piezo Sensor zones (see
page 17).
13