Clarion SR6000 Automobile Alarm User Manual


 
53
© 2005 directed electronics, inc.
QUICK REFERENCE GUIDE
Arming
To arm, press . When the system arms, you will hear a short chirp, and
the parking lights will flash once.
Arming while driving
To arm the system while driving, press on your remote while the vehicle
is running. The system will chirp once and then once more to indicate that
the ignition is on.
Disarming
To disarm, press . You will hear two chirps, and the parking lights will
flash twice.
High security disarm
For high security disarm, press on your remote and the siren will stop
sounding. To completely disarm the security system, press again and the
system will chirp 4 or 5 times (reporting the trigger).
Disarming without a remote
Turn on the ignition. Press the Valet
®
button within 15 seconds. The system
should now disarm. If it does not, you may have waited too long, so turn the
ignition off and on and try again.
Silent Mode
Pressing briefly before arming or disarming will eliminate the confirma-
tion chirp(s) for that one operation only.
Panic Mode
Press for 2 seconds, and you will enter Panic Mode. The siren will sound
and the parking lights will flash for 30 seconds. To stop Panic Mode at any
time, press on the remote again.
To remote start the vehicle
Press twice within 3 seconds. The parking lights will turn on (if
connected) and the vehicle will start and run for the programmed period of
time.
To disable the remote start system
To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Valet
®
switch_________________________________
Number of Valet
®
switch pulses for disarming_______________
CCuutt aalloonngg ddootttteedd lliinnee aanndd ffoolldd ffoorr aa qquuiicckk aanndd eeaassyy rreeffeerreennccee ttoo kkeeeepp iinn yyoouurr ppuurrssee oorr wwaalllleett..