Filter
Top Products
28
© 2005 directed electronics, inc.
seconds of the triggered sequence will disarm the security system
immediately. The six second timer is provided for your conve-
nience, in case the system is accidentally triggered.
disarming without a remote
If your remote is lost or damaged, you can manually disarm your
vehicle security system. To disarm the system without a remote,
you must have the vehicle's ignition key and know where the
Valet
®
button is located. Be sure to check with your installer at
the time of installation for both the location and the preset
response (1-5 presses) of the Valet
®
button.
To disarm the security system,
turn the ignition to the ON posi-
tion. Press the Valet
®
button the
preset number of times (one to
five times) within 15 seconds.
After five seconds, the system
will disarm. If the system does
not disarm, you may have waited
too long; turn the ignition off
and on and try again.
Location of Valet
®
Button_________________________________
Number of Presses_____________________________________
important! The Valet
®
button can be programmed to
respond to 1-5 presses for the disarm function. You must
check with the installer to verify the programming for
your individual unit.
DRW-35
➜