Clarion SR6000 Automobile Alarm User Manual


 
44
© 2005 directed electronics, inc.
oowwnneerr rreeccooggnniittiioonn
Owner Recognition is a revolutionary new feature available only
from ProSecurity. Using a ProSecurity Programmer, hand-held
programming tool, your dealer can program many of the system
settings. The programmer makes it possible to program different
settings for each remote that is used with the system. Then,
whenever a specific remote is used, the system will recall the
settings assigned to that remote. Owner Recognition lets up to
four users of the system have different settings that meet their
specific needs. It is almost like having four separate alarms in your
vehicle, one for each user.
rraappiidd rreessuummee llooggiicc
This ProSecurity system will store its current state to non-volatile
memory. If power is lost and then reconnected the system will
recall the stored state from memory. This means if the unit is in
Valet
®
Mode and the battery is disconnected for any reason, such
as servicing the car, when the battery is reconnected the unit will
still be in Valet
®
Mode. This applies to all states of the system
including arm, disarm, and Valet
®
Mode.
note: Owner Recognition cannot be programmed with-
out a Bitwriter and the necessary software. Check with
your dealer for more information.