Filter
Top Products
Black plate (46,1)
Chevrolet Silverado Owner Manual - 2011
10-46 Vehicle Care
A. Cargo Lamp
B. Center High-Mounted
Stoplamp (CHMSL) Bulb
2. On the reverse side of the lamp
assembly, remove the bulb
socket by turning it one quarter
turn counterclockwise and pull it
straight out.
3. Remove the bulb by pulling it
straight out of the socket.
4. Install the bulb by pushing the
bulb straight into the socket.
5. Install the bulb socket into the
lamp asembly by turning it
one quarter turn clockwise.
6. Reinstall the lamp assembly and
tighten the screws.
License Plate Lamp
To replace one of these bulbs:
1. Reach under the rear bumper for
the bulb socket.
2. Turn the bulb socket
counterclockwise and pull the
bulb socket out of the connector.
3. Pull the old bulb straight out
from the bulb socket.
4. Install the new bulb.
5. Reverse Steps 1 and 2 to
reinstall the bulb socket.
Replacement Bulbs
Exterior Lamp Bulb
Number
Back-up Lamp 921
Back-up Lamp* 1156
Cargo Lamp
and Center
High-Mounted
Stoplamp
(CHMSL)
912
Fender
Marker Lamp
168
High-Beam
Headlamp
9005LL