Filter
Top Products
Black plate (66,1)
Chevrolet Silverado Owner Manual - 2011
3-66 Seats and Restraints
2. See Securing Child Restraints
(Rear Seat Position)
on
page 3‑68
or Securing Child
Restraints (Center Front Seat
Position)
on page 3‑71
or
Securing Child Restraints
(Right Front Seat Position)
on
page 3‑71
for instructions on
installing the child restraint
using the safety belts.
3. Before placing a child in the
child restraint, make sure it
is securely held in place.
To check, grasp the child
restraint at the LATCH path and
attempt to move it side‐to‐side
and back‐and‐forth. There
should be no more than 2.5 cm
(1 in) of movement for proper
installation.
Crew and Extended Cab Models
1. Attach and tighten the
lower attachments to the
lower anchors. If the child
restraint does not have lower
attachments or the desired
seating position does not have
lower anchors, secure the child
restraint with the top tether and
the safety belts. Refer to your
child restraint manufacturer
instructions and the instructions
in this manual.
1.1. Find the lower anchors
for the desired seating
position.
1.2. Put the child restraint on
the seat.
1.3. Attach and tighten the lower
attachments on the child
restraint to the lower
anchors.
2. If the child restraint manufacturer
recommends that the top tether
be attached, attach and tighten
the top tether to the top tether
anchor (loop), if your vehicle has
one. Refer to the child restraint
instructions and the following
steps:
Example — Rear Driver Side
Position