Filter
Top Products
Black plate (14,1)
Chevrolet Silverado Owner Manual - 2011
1-14 In Brief
Storing Memory Positions
To save into memory:
1. Adjust the driver seat and
seatback recliner, both outside
mirrors, and the throttle and
brake pedals, if available.
See Power Mirrors
on
page 2‑16
and Adjustable
Throttle and Brake Pedal
on
page 9‑32
for more information.
Not all mirrors and adjustable
throttles and brake pedals will
have the ability to save and
recall their positions.
2. Press and hold “1” until
two beeps sound.
3. Repeat for a second driver
position using “2.”
To recall the memory positions,
press and release “1” or “2.” The
vehicle must be in P (Park). A single
beep will sound. The seat, outside
mirrors, and adjustable throttle and
brake pedals, if available, will move
to the position previously stored for
the identified driver.
See “Memory Seat, Mirrors,
and Pedals” under Power Seat
Adjustment
on page 3‑5
and
Vehicle Personalization (with DIC
Buttons)
on page 5‑53
for more
information.
Easy Exit Driver Seat
The easy exit driver seat feature
can move the seat rearward to allow
extra room to exit the vehicle.
B : Press to recall the easy exit
seat position. The vehicle must be
in P (Park).
See “Memory Seat, Mirrors,
and Pedals” under Power Seat
Adjustment
on page 3‑5
and
Vehicle Personalization (with DIC
Buttons)
on page 5‑53
for more
information.
Heated Seats
On vehicles with heated front seats,
the controls are located on the
driver and passenger doors.
I : Press to heat the
seatback only.
J : Press to heat the seat and
seatback.
The light on the button will come
on to indicate that the feature is
working. Press the button to cycle
through the temperature settings of
high, medium, and low and to turn
the heat to the seat off. Indicator
lights will show the level of heat
selected: three for high, two for
medium, and one for low.
See Heated Front Seats
on
page 3‑11
.