Filter
Top Products
Black plate (28,1)
Chevrolet Camaro Owner Manual - 2010
6-28 Infotainment System
3. Say the complete phone number
to be stored at once with no
pauses.
.
If the system recognizes
the number the response is
“OK, Storing”.
.
If the system does not
recognizes the phone
number, the response is
“Store <Phone number>”.
“Please say yes or no”.
If the number is correct,
say “Yes”. If the number
is not correct, say “No”.
The system will ask for
the number again.
4. After the system stores the
phone number, it responds
“Please say the name tag”
followed by a tone.
5. Say a name tag for the phone
number. The name tag is
recorded and the system
responds “About to store <name
tag>. Does that sound OK?”.
.
If the name tag does not
sound correct, say “No” and
repeat Step 5.
.
If the name tag sounds
correct, say “Yes” and the
name tag is stored. After
the number is stored the
system returns to the
main menu.
Using the Digit Store Command
The digit store command allows a
phone number to be stored by
entering the digits individually.
1. Press
b g. The system
responds “Ready” followed by
a tone.
2. Say “Digit Store”. The system
responds “Please say the first
digit to store” followed by a tone.
3. Say the first digit to be stored.
The system will repeat back the
digit it heard followed by a tone.
Continue entering digits until the
number to be stored is complete.
.
If an unwanted number is
recognized by the system,
say “Clear” at any time to
clear the last number.
.
To hear all of the numbers
recognized by the system,
say “Verify” at any time.
4. After the complete number
has been entered, say “Store”.
The system responds “Please
say the name tag” followed by
a tone.