Filter
Top Products
Black plate (25,1)
Chevrolet Camaro Owner Manual - 2010
Infotainment System 6-25
Conference Calling
Conference calling must be
supported on the Bluetooth phone
and enabled by the wireless service
carrier to work.
To start a conference while in a
current call:
1. Press the MENU/SELECT knob
and select Enter Number.
2. Enter the character sequence
then select call. See “Entering a
Character Sequence” in the
Operation
on page 6‑3
for
more information.
3. After the call has been placed,
press the MENU/SELECT knob
and choose Merge Calls.
4. To add more callers to the
conference call, repeat steps 1
through 3. The number of callers
that can be added are limited by
your wireless service carrier.
Ending a Call
Press the MENU/SELECT knob and
select Hang Up.
Muting a Call
To Mute a Call
Press the MENU/SELECT knob and
select Mute Call.
To Cancel Mute
Press the MENU/SELECT knob and
deselect Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
The in‐vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu driven
phone system.
1. Press the MENU/SELECT knob
and select Enter Number.
2. Enter the character sequence.
See “Entering a Character
Sequence” in the Operation
on
page 6‑3
for more information.
Bluetooth (Voice
Recognition)
Pairing
A Bluetooth cell phone must be
paired to the Bluetooth system and
then connected to the vehicle before
it can be used. See the cell phone
manufacturer user guide for
Bluetooth functions before pairing
the cell phone. If a Bluetooth phone
is not connected, calls will be made
using OnStar
®
Hands‐Free Calling,
if available. Refer to the OnStar
owner's guide for more information.
The pairing process can be started
by using the voice recognition
system or the controls on the
infotainment system.