Filter
Top Products
Reducing Speed While Using Cruise
Control
To reduce your speed while using cruise control:
.
Press and hold the SET– button on the steering
wheel until the desired lower speed is reached,
then release it.
.
To slow down in small amounts, press the SET–
button on the steering wheel briefly. Each time this
is done, the vehicle goes about 1.6 km/h (1 mph)
slower.
Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase the vehicle
speed. When you take your foot off the pedal,
the vehicle will slow down to the previous set
cruise speed.
Using Cruise Control on Hills
How well the cruise control will work on hills depends
upon the vehicles speed, load, and the steepness of the
hills. When going up steep hills, you may have to step
on the accelerator pedal to maintain the vehicle's
speed. When going downhill, you may have to brake or
shift to a lower gear to keep the vehicle's speed down.
When the brakes are applied the cruise control
shuts off.
Ending Cruise Control
There are three ways to end cruise control:
.
Step lightly on the brake pedal.
.
Press [ on the steering wheel.
.
Press T on the steering wheel.
Erasing Speed Memory
The cruise control set speed memory is erased when
the cruise control or the ignition is turned off.
4-9