Filter
Top Products
Removing the Spare Tire and Tools
If your vehicle has the rear compartment storage
panel/cover, you will have to remove it to access
the load floor. See Rear Compartment Storage
Panel/Cover on page 140 for more information.
To access the spare tire and tools, do the following:
1. Lift the load floor up and pull it out of the
vehicle and set it aside.
2. Remove the nut retaining the spare tire.
3. Remove the compact spare tire. See Compact
Spare Tire on page 416 for more information.
4. Locate the jack and wheel wrench, which are
located on the driver’s side of the rear cargo
area, behind an access door. Pull out the
access door to reach them.
406