Filter
Top Products
NAVIGATION MENU
34 Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)
Once set tap to confirm the selection and return to the settings screen. Tap to
return to the settings screen without saving.
8.11 Brightness
Allows you to change the brightness of the screen so
as to optimise it for differently lit environments.
Tapping will change the screen to the brightness
setting screen.
There are 5 settings available and are shown as bars,
with an arrow indicating the currently selected level.
Use the and keys to set the required level,
the brightness will be reflected in the screen as the
change is made.
Once set tap to confirm the selection and return to the settings screen. Tap to
return to the settings screen without saving.
8.12 Calibration
This option allows you to calibrate the screen so that it responds accurately to your screen
taps. You will need this function only if the unit begins to respond inconsistently to your
screen taps.
When tapped you will be shown a warning screen, tap to confirm you would like to
calibrate the screen. The screen will change to the calibration screen; follow the onscreen
instructions in order to complete the calibration process.
9 Route Plan
Once you have entered your destination and
confirmed it is correct, you will be taken to the Route
Plan screen; from here you can begin navigating,
carry out a simulation of the route or add additional
waypoints to the journey.
Tap
to return to the Free Navigation Menu
screen.
Select a destination so that it is highlighted orange
and tap to view the location on the map.
9.1 Navigating
To begin navigating to you entered destination tap . The unit will begin to calculate a
route from your current location to your destination. Once calculated the screen will change
to the route navigation screen and you are ready to drive.