Filter
Top Products
NAVIGATION MENU
29 Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)
8.1 Language
Tap to open the language selection screen. You can
choose from 10 different languages. When a
language is selected not only will it affect the text on
the screen, but will also change the language of the
spoken voice directions.
Tap or to scroll back and forth
between each page.
Select the required language so that it is
highlighted orange and tap to confirm. The
unit will return to the settings screen.
8.2 Safety Alert
Tap to open the safety alert options screen. From this screen you can set two separate
safety alerts.
Speed camera on – This lets you activate or
deactivate the speed camera warning, when
activated the unit will warn you of an approaching
speed camera visually and show you the distance to the
camera.
When the option is shown with an orange indicator it is
activated.
Speed alert when exceeding the road speed limit –
This lets you activate or deactivate the road speed limit warning. As well as speed camera
locations, the unit contains information about the speed limit of many roads. When activated
the unit will show you the speed limit for the road you are on with a fixed speed limit icon, if
you exceed the speed limit (including any tolerance you have set) for the road you are on the
speed limit icon will flash and the unit will beep.
When the option is shown with an orange indicator it is activated.
When active you can then change the speeding tolerance using the
and keys to
select the tolerance you would like from 0%, 5%, 10%, 15% and 20%. The unit will then only
warn you when you exceed the speed limit by more than this percentage.
Set the required options and tap to confirm
the unit will then return to the settings screen.
8.3 Trace Record
The unit is capable of logging all positioning
information received from the GPS satellites during
navigation. It then uses this information to draw a
track of the route on the map. This enables you to
review the route at a later time.
If you have previously recorded any trace records these will be shown in the list. If there are
no trace records you will have to record one first.