Filter
Top Products
{CAUTION:
Raising your vehicle with the jack
improperly positioned can damage the
vehicle and even make the vehicle fall. To
help avoid personal injury and vehicle
damage, be sure to fit the jack lift head
into the proper location before raising the
vehicle.
Notice: If you position the jack under the
rocker molding and attempt to raise the
vehicle, you could break the molding and/or
cause other damage to your vehicle. Always
position the jack so that when the jack head is
raised, it will fit firmly in the notch located
inboard from the rocker molding.
4. Turn the wheel wrench counterclockwise to
lower the jack lift head until the jack fits
under the vehicle.
5. Raise the jack by turning the wheel wrench
clockwise until the slots in the jack head fit
into the metal flange located behind the
triangle on the plastic molding as shown.
6. Put the compact spare tire near you.
429