Filter
Top Products
3. Press and hold the exit button located above
buttons 1 and 2 on the driver’s door armrest
for at least three seconds.
Two beeps will sound to confirm that the exit
position has been saved.
4. Repeat the procedure for a second driver using
memory seat button 2 or the RKE transmitter,
that has the number 2 on the back of it.
To recall the stored exit positions, press and
release the exit button. One beep will sound, and
the seat will move to the stored exit position
for that driver. If an exit position has not been
stored for this driver, the seat will move all the way
back. The position of the outside mirrors does
not change for the exit position.
If your vehicle has an automatic transmission, the
vehicle must be in PARK (P) to recall the exit
positions. If your vehicle has a manual transmission
and the engine is running, the parking brake must
be set to recall the stored exit positions.
Three chimes will sound and the exit setting will
not be recalled if you press the exit button
when the vehicle is not in PARK (P) on an
automatic transmission or the parking brake is not
set on a manual transmission.
If you would like your stored exit position to be
recalled when unlocking the vehicle with the RKE
transmitter, or when the ignition is turned off
and the driver’s door is opened, see DIC Vehicle
Personalization on page 239.
13