5. Tilt the retainer (C) and slip it through the
wheel opening to remove the spare tire
from the cable (B).
6. Turn the wrench clockwise until you feel two
slips or hear two clicks after removing the
spare tire to raise the cable back up.
Do not store a full-size or a flat road tire under
the vehicle. See Storing a Flat or Spare Tire
and Tools on page 439.
To continue changing the flat tire, see Removing
the Flat Tire and Installing the Spare Tire on
page 429.
If the spare tire will not lower, the secondary latch
may be engaged causing the tire not to lower.
Do the following to check the cable:
1. Check under the
vehicle to see if the
cable is visible. If
it is not visible, see
Secondary Latch
System on
page 436.
428