Filter
Top Products
High-Speed Operation
{CAUTION:
Driving at high speeds, 100 mph (160 km/h)
or higher, puts an additional strain on tires.
Sustained high-speed driving causes
excessive heat build up and can cause
sudden tire failure. You could have a crash
and you or others could be killed. Some
high-speed rated tires require inflation
pressure adjustment for high speed
operation. When speed limits and road
conditions are such that a vehicle can be
driven at high speeds, make sure the tires
are rated for high speed operation, in
excellent condition, and set to the
correct cold tire inflation pressure for the
vehicle load.
If you will be driving at high speeds, speeds of
100 mph (160 km/h) or higher, where it is legal, set
the cold inflation pressure to the maximum inflation
pressure shown on the tire sidewall, or 38 psi
(265 kPa), whichever is lower. See the example
following. When you end this high-speed driving,
return the tires to the cold inflation pressure shown
on the Tire and Loading Information label. See
Loading Your Vehicle on page 322.
Example:
You will find the maximum load and inflation
pressure molded on the tire’s sidewall, in small
letters, near the rim flange. It will read something
like this: Maximum load 690 kg (1521 lbs)
300 kPa (44 psi) Max. Press.
For this example, you would set the inflation
pressure for high-speed driving at
38 psi (265 kPa).
409