Filter
Top Products
2. Find the jacking location using the diagram
above and corresponding triangular-shaped
hoisting notches located in the plastic molding.
The front location (A) is about 14 inches
(35.6 cm) from the rear edge of the front
wheel well, and the rear location (B) is about
7 inches (17.8 cm) from the front edge of
the rear wheel well.
3. Attach the wheel wrench to the jack.
{CAUTION:
Getting under a vehicle when it is jacked
up is dangerous. If the vehicle slips off
the jack you could be badly injured or
killed. Never get under a vehicle when it
is supported only by a jack.
{CAUTION:
Lifting a vehicle and getting under it to
do maintenance or repairs is dangerous
without the appropriate safety equipment
and training. The jack provided with your
vehicle is designed only for changing a
flat tire. If it is used for anything else, you
or others could be badly injured or killed
if the vehicle slips off the jack. Use the
jack provided with your vehicle only for
changing a flat tire.
428