Cadillac 2007 CTS-V Automobile User Manual


 
If your vehicle has an automatic transmission, the
vehicle must be in PARK (P) to recall the stored
driving positions.
If your vehicle has a manual transmission and the
engine is running, the parking brake must be
set to recall the memory seat driving positions. The
stored driving positions can be recalled without
setting the parking brake if the vehicle is off.
Press one of the numbered memory buttons to
recall the stored setting. Each time a memory
button is pressed, a single beep will sound.
Three chimes will sound and the setting will not
be recalled if you press button 1 or 2 when
the vehicle is not in PARK (P) on an automatic
transmission or the parking brake is not set on a
manual transission.
If you would like the stored driving positions to be
recalled when unlocking your vehicle with the
Remote Keyless Entry transmitter or after the key
is placed in the ignition, see DIC Vehicle
Personalization on page 239.
To stop recall movement of the memory feature at
any time, press one of the power seat or mirror
controls.
Two personalized exit positions can also be
programmed. Use the following steps to program
exit positions:
1. Press memory seat button 1 or the unlock
button on the RKE transmitter, that has the
number 1 on the back of it, to recall the driving
position.
2. Adjust the driver’s seat to the desired exit
position.
12