Bushnell 201951EU GPS Receiver User Manual


 
23
LASER TROUBLE SHOOTING
If unit does not turn on - LCD does not illuminate:
• Depress FIRE button.
• Check battery condition and if necessary, charge battery.
If unit powers down (display goes blank when attempting to fire the laser):
• The battery charge is too low. Charge the battery using the USB cable and AC adapter for at least 6 hours.
If target range cannot be obtained:
• Make sure LCD is illuminated.
• Make sure that the FIRE button is being depressed.
• Make sure that nothing, such as your hand or finger, is blocking the two front lenses that transmit and receive the laser
pulses.
• Make sure unit is held steady while depressing FIRE button.
NOTE: The last range reading does not need to be cleared before ranging another target. Simply aim at the
new target using the LCD’s circular reticle, depress the FIRE button and hold until the new range reading is
displayed.
GPS TROUBLE SHOOTING
Problem: The backlight does not work.
Turn the Hybrid off for ten (10) seconds and try again. Re-test in a low-light environment.
From the Main Menu, press and release the FIRE button.
Problem: The Hybrid will not turn off.
Press and hold FIRE button for at least ten (10) seconds.
201951+201951EU Hybrid_5LIM_rev102312_Geodis repack version.indd 23 10/25/12 4:44 PM