Filter
Top Products
12
STARTING UP/FIRE BUTTON OPERATION
Power On
• Press and hold the FIRE button until “Bushnell Hybrid” appears (about 2 seconds).
Power Off
• Press and hold the FIRE button until the screen goes blank*.
Backlight On/Off
• From any screen, press the FIRE button to turn the backlight on.
• Press FIRE button again to turn the backlight off.
*NOTE: the unit will automatically power off after 45 minutes if no buttons are pressed.
To override this, enter the OPTIONS menu, select SETTINGS and change the AUTO OFF setting to “OFF”.
First, be sure the battery has a full charge. If you are using it for the first time, it should be charged for 6 hours minimum
(refer to “Charging the Battery” on pg. 6 for details). Next, make sure you are outdoors, in a location with a clear view
of the sky overhead, to ensure good reception of GPS satellite signals. Now, you’re ready to power up and begin to
use your Hybrid.
Hold down the FIRE button until you see the startup screen, and then release it.
You will see the Main Menu screen, which has only two items: PLAY GOLF and
OPTIONS (Fig. 1).
Using the Hybrid menu system is simple:
1. Select (highlight) a menu item using the UP/DOWN buttons.
2. Press the OK/SHOT button to enter it.
3. Press the ESC/MENU button to return to the previous menu level.
Fig. 1
201951+201951EU Hybrid_5LIM_rev102312_Geodis repack version.indd 12 10/25/12 4:44 PM