Filter
Top Products
Black plate (59,1)
Buick Lucerne Owner Manual - 2011
(B) Tire Ply Material : The type of cord and
number of plies in the sidewall and under the
tread.
(C) Tire Identificat ion Number (TIN)
: The letters
and numbers following the DOT (Department of
Transportation ) code is the Tire Identification
Number (TIN). The TIN shows the manufact urer
and plant code, tire size, and date the tire was
manufactured. The TIN is molded onto both sides
of the tire, although only one side may have the
date of manufacture.
(D) Maximum Cold Inflation Load Limit
:
Maximum load that can be carried and the
maximum pressure needed to support that load.
(E) Tire Inflation
: The temporar y use tire or
compact spare tire should be inflated to 60 psi
(420 kPa). For more information on tire pressure
and inflation see Inflation - Tire Pressure
on
page 6‑63
.
(F) Tire Size
: A combination of letters and
numbers define a tire's width, height, aspect ratio,
construction type, and service description. The
letter T as the first character in the tire size means
the tire is for temporary use only.
(G) TPC Spec (Tire Performance Criteria
Specification)
: Original equipment tires designed
to GM's specific tire performance criteria have a
TPC specifica tion code molded onto the sidewall.
GM's TPC specifications meet or exceed all
federal safety guidelines.
Tire Size
The following illustration shows an example of a
typical passenge r vehicle tire size.
(A) Passenger (P‐Metric) Tire: The United States
version of a metric tire sizing system. The letter P
as the first character in the tire size means a
passenger vehicle tire engineered to standards
set by the U.S. Tire and Rim Associatio n.
(B) Tire Width
: The three‐digit number indicates
the tire section width in millimeters from sidewall
to sidewall.
6-59