Filter
Top Products
Black plate (86,1)
Buick Lucerne Owner Manual - 2011
3. Say each digit, one at a time, that you want to
store. After each digit is entered, the system
repeats back the digit it heard followed by a tone.
After the last digit has been entered, say “Store”,
and then follow the directions given by the system
to save a name tag for this number.
Using the “Delete” Command
1. Press and hold b g for two seconds.
2. Say “Delete”.
3. Say the name tag you want to delete.
Using the “Delete All Name Tags”
Command
This command deletes all stored name tags in the
Hands Free Calling Directory and the OnStarTurn by
Turn Destinations Directory.
To delete all name tags:
1. Press and hold
b g for two seconds.
2. Say “Delete all name tags”.
Listing Stored Numbers
The list command will list all the stored numbers and
name tags.
Using the “List” Command
1. Press and hold b g for two seconds.
2. Say “Directory”.
3. Say “Hands Free Calling”.
4. Say “List”.
Making a Call
Calls can be made using the following commands.
Dial or Call: The dial or call command can be used
interchangeably to dial a phone number or a stored
name tag.
Digit Dial: This command allows a phone number to be
dialed by entering the digits one at a time.
Re‐dial : This command is used to dial the last number
used on the cell phone.
Using the “Dial” or “Call” Command
1. Press and hold b g for two seconds.
2. Say “Dial” or “Call”.
3. Say the entire number without pausing or say the
name tag.
Once connected, the person called will be heard
through the audio speakers.
4-86