Auto Page RST-2053AL Automobile Alarm User Manual


 
DOMELIGHT ILLUMINATED ENTRY (OPTIONAL)
Your AutoPage Vehicle Security System is equipped with a domelight illuminated entry feature which
will turn on the vehicles interior lights for 30 seconds after the Security System is disarmed / un-
locked. This feature will reset once the vehicles ignition is turned ON or if the Security System is re-
armed.
PATHWAY ILLUMINATION (OPTIONAL)
When disarming the Security System, the vehicles parking lights will stay on illuminating your path-
way to the vehicle. The vehicles parking lights will stay on for 30 seconds or until the vehicles ignition
is turned to the ON position.
3 or 30 SECOND ARMING DELAY (SELECTABLE)
After arming your vehicle with the Remote Control Transmitter, the siren will chirp (1) time and the
vehicles parking lights will flash (1) time. The Security System will instantly go into a 3 second or 30-
second standby mode to monitor all Security System functions. The install will program this feature to
your reques. After the time has elapsed, the Security System is now be fully armed. If a door is
opened or if you have a faulty sensor, the Security System will give a warning by chirping the siren (3)
times.
SHOCK SENSOR
Your AutoPage Security System includes a dual zone shock sensor designed to trigger the Security
System from impact to the vehicle, such as a window being broken. If sensitivity adjustment should
become necessary consult your local Authorized Dealer. Do not attempt to do this on your own!
SENSOR BYPASS
Your AutoPage Vehicle Security is equipped with a sensor bypass feature that disables the shock &
option sensors in the event your vehicle is subject to false alarms. To enable the sensor bypass mode,
simply press the LOCK button twice within 3 seconds when arming the Security System. The Secu-
rity System will chirp one additional time to confirm the sensor bypass mode was activated. The
Sensor Bypass feature is programmed to activate for one arming cycle only. The Security System will
return to normal operation during the next arming cycle.
STARTER DISABLE FEATURE (OPTIONAL)
If installed with your Security System, this feature is designed to prevent a thief from starting your
vehicle once they have broken in to it.
Transmitter Button Actions System Function
Press Lock Doors
Once Arm System
Press & Hold Panic
3 Seconds Function
Press Arm & D elete
Twice Optional Sensor
Press Unlock Doors
Once Disarm System
Press & Hold Channel Two
2 Seconds Trunk Control
Press Twice - Only Passive Arming
During Passive Arming By-Pass
Press Car
Twice Locator
Press Channel Three
Both Together AUX Control
Press & Hold Remote Start
2 Seconds ON / OFF
Press Both Together Silent
Ignition in O FF Position Arm /D isarm
2nd Car Operation Side Button
Garage Door Opener Switching Code