Filter
Top Products
Your AutoPage Security System comes with two 5-button Remote Control Transmitters that feature a
sophisticated code hopping system that will prevent illegal use of a code grabber with an attempt to
record and steal your transmitter codes.
LOCK – ARM & LOCK
To arm your Security System, press the LOCK button once. The siren will chirp (1) time and the
vehicles parking lights will flash (1) time indicating that the Security System is now armed. The vehicles
doors will lock upon arming when interfaced with the Security System.
UNLOCK – DISARM & UNLOCK
To disarm your Security System, press the UNLOCK button once. The siren will chirp (2) times and the
vehicles parking lights will flash (2) times indicating that the Security System is now disarmed. The
vehicles doors will unlock upon disarming when interfaced with the Security System.
DELETING THE ARM/DISARM CHIRP
When attempting to arm or disarm your Security System, you have the option of temporarily muting the
siren chirp sound. To perform this function, simply depress both LOCK & UNLOCK buttons on the
Remote Control Transmitter at the same time. No chirp sound will be heard, arm / disarm confirmation
will be through the vehicles parking lights only.
CAR LOCATOR
Your AutoPage Vehicle Security System is equipped with a vehicle locator function which chirps the
siren 6 times and flashes the vehicle’s parking lights 12 times to easily locate your vehicle. To access
this function, simply press the CAR icon button firmly 2 times on the Remote Control Transmitter.
REMOTE PANIC FUNCTION
The Remote Control Transmitter may be used as a remote panic switch that will activate the Security
System’s siren and the vehicles parking lights in case of an emergency. To activate the PANIC function,
press and hold the
LOCKLOCK
LOCKLOCK
LOCK button on the Remote Control Transmitter for (3) seconds. The siren will
sound and the vehicles parking lights will flash continuously. To cancel the PANIC function, press the
lock or unlock button on the Remote Control Transmitter.
2nd CHANNEL AUXILIARY FUNCTION (OPTIONAL)
You may use the CAR icon button on your Remote Control Transmitter for a separate function. For
example, if your vehicle is equipped with an electronic trunk release, the Security System can be inter-
faced with it and can electronically release your trunk by pressing the CAR icon button for 2 seconds on
the Remote Control Transmitter.
3rd CHANNEL AUXILIARY FUNCTION (OPTIONAL)
You may use the CAR icon & LOCK buttons together on your Remote Control Transmitter for a sepa-
rate function. For example, if your vehicle is equipped with power windows or a sunroof , the Security
System can be interfaced with an optional window module that can electronically control your power
windows or sunroof by pressing the CAR icon & LOCK buttons together for 2 seconds on the Remote
Control Transmitter.
SECURITY OPERATIONS
REMOTE TRANSMITTER OPERATION
OVERRIDE FUNCTION
The OVERRIDE FUNCTION may be used if the Remote Control Transmitter is lost or inoperative.
To operate, enter the vehicle (alarm will sound), turn the vehicles ignition to the “ON” position and
push the valet/override switch untill the Security System stops sounding. The Security System is
disarmed & reset. Have your Remote Control Transmitter serviced or replaced.