Filter
Top Products
6
TABLE OF COMMANDS
CONFIRMATION
VEHICLE REMOTE CONTROL
COMMANDS
BUTTONS
LIGHTS SIREN * BUTTON (LED) BEEP
1X A 1
2X B 2
10X C
START / CONTINUOUS MODE
1 -
1
X D 1-20
STOP
> 4 sec.
1 - 1
X
ACCESS TO COMMAND GROUP #2
> 2 sec.
- -
(10 sec.) -
LOCK / ARMING *
1 / 3* 1 / 3 / X * 1
X 1
UNLOCK / DISARMING *
2 / 4* 2 / 4 / X * 2
X 2
TRUNK
3 / 1 - 1
X /2X 1 /2
> 4 sec.
PANIC
> 4 sec.
30 / 60
SEC. -
CAR FINDER
3 - 1
X 1
ACTIVATE
4
1X 1
SENTINEL
CANCEL
2
3
-
2
X 2
RUNTIME
1 - 4 -
1
X
1-4
ACTIVATE 4 1X 1
VALET MODE
CANCEL
2
-
2
X 2
ACTIVATE 1X 1
UTILITY 1
CANCEL
1 -
2x
2
ACTIVATE 1X 1
GROUP 1
UTILITY 2
CANCEL
1 -
2x
2
STARTING POSSIBLE
1
STATUS
STARTING DISABLED
- -
2
STOP
> 4 sec.
1 - 1X
ACCESS TO COMMAND GROUP #1
> 2 sec.
- - - -
LOCK
1
KEYPAD (REMOTE CONTROL)
UNLOCK
- -
2X 2
ACTIVATE
-
MUTE (REMOTE CONTROL)
CANCEL
- -
2X 2
PAGER
- - 16X 16
REMOTE PROGRAMMING
See Pager on page 5.
RANGE SETTING
See Range setting on page 5.
START TEMPERATURE
1 - 4 - 1X 1-4
DISPLAY START FAIL CODES
1 - 20 - 1X 1-20
DISPLAY ALARM CODES *
1 - 8 - 1x 1-8
UTILITY 3
1 - 1X 1
GROUP 2
UTILITY 4
1 - 1X 1
LEGEND :
= BLINKING LED 0 – NUMBER OF CHIRPS OR BEEPS
= MELODY OR TONE, REPLACED BY VIBRATIONS IN MUTE MODE, EXCEPT FOR PANIC AND PAGER COMMANDS
0
= REFERS TO A COMMENT IN TABLE ON FOLLOWING PAGE “ – “ = NO CONFIRMATION
REMARKS:
* ITEMS FOLLOWED BY AN ASTERISK (*) APPLY ONLY TO COMMAND UNITS EQUIPPED WITH A SECURITY SYSTEM.
1 = N
O ZONE IS IN VIOLATION DURING ARMING. 2 = NO ZONE WAS IN VIOLATION WHILE ALARM WAS ARMED. 3 = AT LEAST ONE ZONE IS IN VIOLATION
DURING ARMING
. 4 = AT LEAST ONE ZONE WAS IN VIOLATION WHILE ALARM WAS ARMED. X = NO CHIRP WHEN VALET MODE IS ACTIVE OR WHEN ALARM
IS PROGRAMMED AS DISABLED