Remote Transmitter Functions
Trunk (default button)
1. Press and hold the button.
2. The doors will unlock (optional), continue holding until the Trunk Release
activates. The trunk release will be confirmed by one park light flash and
siren*** or horn (optional) chirp.
Trunk (optional button*)
1. Press and hold the button.
2. The doors will unlock (optional), continue holding until the Trunk Release
activates. The trunk release will be confirmed by one park light flash and
siren*** or horn (optional) chirp.
NOTE: The trunk release output will stay active for 5 seconds as long as the
or buttons are pressed. This feature may be used to roll down power
windows or to open a power sunroof on select vehicles.
IMPORTANT: The trunk release output will not activate when the ignition key is
in the “ON” position.
or
Car Finder (default setting)**
1. Press and hold the button for 3 seconds.
2. The park lights will flash and the siren*** or horn (optional) will honk 5 times.
NOTE: This feature can be used to locate the vehicle in a crowded parking lot.
Panic
1. Press and hold the button.
2. The park lights will flash and the siren*** or horn (optional) will sound.
3. Press and release the or the button to deactivate.
NOTE: Panic will be active for 60 seconds or until deactivated by the remote
transmitter.
*1270 and 2270 series ONLY.
**Not available on the 3265 and 4265 series.
***Alarm series ONLY!
PAGE 9 OWNER’S GUIDE