Filter
Top Products
To Enter User Program Mode
1. Press and hold the button for three seconds. The icon will begin to
flash, the system is now in User Program Mode.
2. Press and release the button to scroll the list of programmable icons.
Selected feature icon will begin to flash.
3a. Press the button to turn the feature icon OFF.
3b. Press the button to turn the feature icon ON.
4. Press the button to exit program mode and save settings.
*If the remote is not used for 20 seconds the system will exit Program
Mode.
Setting The Time
Press and hold the and buttons until the remote transmitter chimes and the
minute portion of the clock begins to flash.
To change from minutes to hours, press and release the button.
To increase the minutes or hours, press and release the button.
To decrease the minutes or hours, press and release the button.
Press and release the button to exit or the remote transmitter will exit if there
is no activity for 20 seconds.
NOTE: To set the AM/ PM icon, continue changing the hour until the
appropriate icon is displayed.
OWNER’S GUIDE PAGE 16
LCD DISPLAY 3265/4265 series