APC AP9830 Remote Starter User Manual


 
ii Remote Power-Off Device Installation and Quick Start
Contents
Set up the Remote Power-Off Device. . . . . . . . . . 14
Remote switch: requirements and pin assignment
16
Pin locations for the keystone jack
16
Pin locations for the RJ-11 connector
16
Connect the switch cable to the keystone jack
17
Placement of accessories
19
How to Turn Off the Output of Multiple UPSs . . . 20
Cascade multiple RPOs (serial setup)
20
Matrix-UPS® in a cascading configuration
21
Connect multiple RPOs in parallel setup (voltage input
switches only)
21
Product Information 22
Selecting and Ordering Components. . . . . . . . . . 22
Remote switch specifications
22
Cable requirements
22
Ordering components
22
Product Specifications . . . . . . . . . . . . . . . . . . . . . 23
Warranty and Service . . . . . . . . . . . . . . . . . . . . . 24
Limited warranty
24
Warranty limitations
24
Obtaining service
24
Life-Support Policy . . . . . . . . . . . . . . . . . . . . . . . 26
General policy
26
Examples of life-support devices
26
Radio Frequency Interference . . . . . . . . . . . . . . . 27