Filter
Top Products
Before beginning your initial setup on ANTARI W-515 & W-530 Fog Machine,
make sure that there is no evident damage caused by transportation. In the
event that the unit's housing or cable is damaged, do not plug it in and do not
attempt to use it until after contacting your ANTARI dealer for assistance.
Setup
Remove all packing materials from shipping box. Check that all foam and
plastic padding is removed, especially in the nozzle area.
Place fog machine on a flat surface and remove fog liquid tank cap.
Place the liquid tube into a properly filled liquid tank.
Fill with high-quality, water-based fog liquid recommended by ANTARI dealer.
The W-515 & W-530 only works with uncontaminated Antari FLR or FLG Fog
Liquid. Any other types of liquid can damage the unit resulting in spitting and
serious clogging problem. When filled, place cap back on liquid tank. Be
careful not to exceed the maximum fluid level. DO NOT OVERFILL.
Operation
Control Panel
The built-in control panel on the rear of the machine features an LCD panel
displaying all operation statuses of the fog machine. The control panel allows
the user to customize fog machine functions by adjusting the fogging duration,
interval, and volume as well as the DMX address, the wireless function and the
fluid sensor. There are six buttons on the control board. All current operating
parameters are automatically stored in non-volatile memory, allowing the
machine to be powered down without losing function settings.
After switching on, the display shortly indicates »Antari W-515/W-530«. Then
the fog machine starts with the warm-up process and the display indicates
»Warming Up«. While the unit is warming up, fog output will not be possible
yet. Program the necessary menu settings with the control panel. Once the
warm-up process is completed, fog output will be possible. The display
indicates »Ready to Fog«.
Additionally, a »W« for wireless and an »S« for fluid sensor is indicated if these
functions are activated.
- Configuration of the buttons
FUNCTION
VOLUME
TIMER
MANUAL
FUNCTION
TIMER
VOLUME
MANUAL
Interval Set
Duration Set
Timer Out
Volume Out
DMX 512 Add
Wireless
Fluid Sensor
2. UP and DOWN
3. TIMER
4. VOLUME
5. MANUAL
-03-