Filter
Top Products
1. Getting Started
This chapter tells you step by step how to perform the initial startup and
introduces you to the external components of your device.
1.1 Setting the ON/OFF Switch
The ON/OFF switch should be set to the ON position for normal operation. Pull
out the stylus pen and use it to slide the ON/OFF switch to the ON (left) position.
CAUTION: Always leave the ON/OFF switch in the ON position for normal
operation.
Reset
On/Off Switch
1.2 Connecting to AC Power and Charging the Battery
Fully charge the battery before using your device for the first time.
1. Slide and click the connector converter onto the AC adapter.
2. Connect the adapter cable to the bottom of your device.
3. Plug the AC adapter into a wall outlet.