Filter
Top Products
54-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
When AUX In is set to “ON”, this setting is available.
Setting item: Primary Name
Setting contents:AUX1 (Initial setting) / DVD / GAME / EXT.DVD /
DVD-CHG. / DVB-T
* / TV
* “DVB-T” is only applicable in Europe/Asia.
• When a DVB-T tuner (sold separately) is connected, you can use it to
connect one more External Input device. Setting the Secondary name
can change the mode name display of this device.
Setting the Secondary AUX Name
Secondary name can be set only when Primary name is set to “DVB-T.”
Setting item: Secondary Name
Setting contents:Off (Initial setting) / AUX2 / DVD / GAME /
EXT.DVD / DVD-CHG. / TV
• The selected source name is displayed instead of AUX mode name.
Switching the Visual Input Signal System
After setting to “On” in “Setting the AUX Mode,” this setting can be
carried out. The video input type can be changed.
Setting item: Signal
Setting contents: Auto (Initial setting) / NTSC / PAL
Connection with external input devices is available through the iPod
VIDEO connector. An optional adapter cable is required (standard RCA
to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
You can also play back video connecting with an optional AV cable (4-
pole mini AV plug to 3-RCA).
Setting item: AUX3 In Sel.
Setting contents: iPod Video (Initial setting) / AUX3
Usable 4-pole mini AV plug
The unit accepts the following 4-pole mini AV plug pin-out:
• Please check pin-out carefully before use of this product. Depending
on the cable, there may be no picture and/or sound.
After setting to “AUX3” in “Setting the AUX3 In Sel.,” this setting can
be carried out. The video input type can be changed.
Setting item: AUX3 Signal
Setting contents: Auto (Initial setting) / NTSC / PAL
RSE Setting
[RSE] is selected on the Source setup menu in step 3. Refer to “Source
Setup Operation” (page 49).
Video and audio can be output to the rear monitor.
Setting item: RSE
Setting contents: Off (Initial setting) / On
• If you selected the “On” setting, set the “Remote Sensor Setting”
(page 40).
Setting the BLUETOOTH Pandora
®
[BLUETOOTH Pandora] is selected on the Source setup menu in
step3. Refer to “Source Setup Operation” (page 49).
To use BLUETOOTH Pandora, set the BLUETOOTH Pandora setting
to “On.”
Setting item: BLUETOOTH Pandora
Setting contents: Off / On (Initial Setting)
• When “On” is set, the BLUETOOTH Pandora
®
source is displayed
on the Top banner on the Audio/Visual screen.
Setting the Primary AUX Name (AUX
Setup)
Auto: The video input signal type (NTSC or PAL) will
be automatically selected.
NTSC/PAL: Choose the video input signal type manually.
Setting the AUX3
iPod Video: Set when connected to an iPod or iPhone.
AUX3: Set when connected to an external input device.
Audio L (White)
Audio R (Red)
Ground
Video (Yellow)
Setting the AUX3 Sel. (Switching the Visual
Input Signal System)
Auto: The video input signal type (NTSC or PAL) will
be automatically selected.
NTSC/PAL: Choose the video input signal type manually.
Setting the Rear Seat Entertainment
System
01GB00INE-W927HD.book Page 54 Thursday, October 4, 2012 5:03 PM